Brewhouse respectively parts of a Brewery-Equipment

The list of equipment of that we offer on our webpage does not fully represent our scope of work. You can send an inquiry about the equipment You require. We can adapt or find needed technical characteristics for any machine with correction for Your type of production. We guaranty timely and competent response.

	Malt handling

Malt acceptance, Elevator, Malt acceptance scale.
Elevator and distribution to 4 Malt silos (rectangular steel sheet silos).
Malt cleaner, dust removal.
Malt scale, make Chronos set up on malt mill.
Malt mill, make K?nzel, 6 roller mill for approx. 1,5 to/h, built 1966.
Grist case, capacity 1,5 to, with shake adjustment.
Spent grains silo, make Vetter, for 3,5 brews in steel, standing outdoor.

	Brewhouse-Equipment

.
2-Kettle-Brewhouse, make Jacob Carl, for 95 - 107 hl cast wort, complete in stainless steel, built 1996.
Mash- /Wort Kettle, 154 hl content, diameter: ~2,8m, manway with sight glass, agitator from top, impeller, mashing in device from top with pre mashing apparatus, high-capacity-interior cooker (5,2m²) and bottom heating (7,2m²) for steam, kettle partly isolated, vapour pipe, kettle standing on tubular steel feet.
Mash- / Lautertun, for dry grist, diameter: ~3,30m, isolated, with 3-arm mash-raking- and spent grains removal machine with knifes in stainless steel, height adjustment, false bottom in stainless steel (false bottom load 198 kg/m²), 10 wort taps, below false bottom rinsing over 15 spray jets, 3 rotational speeds, Lauter tun vapour pipe, kettle wall isolated, kettle standing on T-section.
Spent grains removal adjustment with spent grains pump.
Wort-/turbid wort pump, make Hilge, type: Hygia CN-1/5, 10m³/h.
Water mix station, with automatic valves, complete in stainless steel.
2 Hop addition tubs, stainless steel, for extract or pellets, with screwed lid, flow meter.
cyl.-con. Trub tank, 7 hl, in stainless steel, standing on 3 feet, diameter: 0,79 m, total-H: 2,0 m, inlet DN50, outlet DN80, manway, with rinsing device.
biol. Wort acidification with: 10 hl maturation tank (electr. heated) + 5 hl giving tank, in stainless steel, isolated, stainless steel covered, already out of operation .
Spindle station, free standing.
Automatic control, Comcon 100 "Minibrau", for different beer varieties, with infusion-, mashing in- and 2-mash mode, as too hand control level over mosaic chart, control cabine with integrated power section with Siemens S5-100, with bureau-housing in aluminium/glass.
Podest as steel construction with staircase.
Air compressor, make Kaeser, with compressed air tank and dryer.
For removal of the Brew kettles is a wall opening in the house front necessary, respectively over the roof. The Mill has to be removing over the roof. The building has to be after dismantling only close provisional..

	Cooling house

CIP-plant with 2 small round tanks of approx. 400 lt.

	Tanks

1 Flotation tank, make Gresser, 156 hl, in stainless steel, pulled down cleaning pipe, manway, Panel, built 1993, standing on steel support, diameter: ~ 2,60m, wall height: 2,80m for 5000 €.
2 yeast tubs, each ~300 lt, in stainless steel, coolable, tipable, wall mounted each 400 €.
Caustic tank ~1500 lt, rectangular, standing on feet, in stainless steel, marbled 1000 €.
Cellar pump, self sucking in for 1000 €.
Mobile Pump, with motor protection switch for 650 €.

	Technical units

compressed air supply

Air compressor, make Kaeser, type: BS 50, with capacity: 30 kW, 7,5 bar, volume flow: 5,0 m²/min, built 1990, last MOT 07/2010.
Wind kettle, make Kaeser, approx. 2000 lt content, diameter: 1100mm, H: 2470mm for 4000 €.

steam supply

Steam kettle, make Loos, 3,2 to/h, 10 bar, built 1981, with Weibhaupt-oil burner.
Condensate tank, lying, isolated For 4500 €.
Fuel oil tank, 40m³, standing outdoor, last MOT-check 5/2008 For 4000 €.
Waterpumps.
Pressure raising pump, make Grundfos, type: Hydromono.

	Price for set

"Machinery & Technology" Ltd follows the principle of personal approach to a client and forming the final price of the equipment, according to the individual requirements of the client. In order to receive the price list of the equipment you are interested in, please, fill in the following form.