Automatic machines
  for PET bottles manufacturing

"Machinery & Technology" company supplies automatic machines for PET bottles manufacturing of various production capacity: new,used and after overhauling together with compressor and cooling equipment. We also supply delivery systems of produced PET bottle on to the filling line.

With the help of our company you can also purchase lines of any production capacity of leading world-wide manufactures, such as: KRUPP, SIDEL, SIPA and many others after overhauling and with after-sales service.

The list of equipment of that we offer on our webpage does not fully represent our scope of work. You can send an inquiry about the equipment You require. We can adapt or find needed technical characteristics for any machine with correction for Your type of production. We guarantee timely and competent response.

	PET stretch blow moulder SIPA SF 4000

• year 1999
• in very good conditions
• only 10.000 working hours
• Produced bottles : 30.000.000
• Real production : 3.750 bph, (nominal output 4.000)
• For transport overseas a container 40ft OT is sufficient
• Voltage : 380 Volt - 50 Hz
• Installed power : 115 Kw
• Air services 8 bar : 100 Nmc/h max
• Air blowing 35-40 bar : 473 Nmc/h max
• Installed blow mould : 1,5 liter neck 28mm PCO/BPF
• Spare blow mould : 2 liter neck 28mm PCO/BPF
• Not included water chiller for mould & oven cooling because used centralized plant
• Not included the air blowing compressor

	PET stretch blow moulder SIG CORPOPLAST Blowmax 10 - Ser. II

• Manufacturer: SIG-Corpoplast
• Type: Blowmax 10 - Ser. II
• Year of construction: 2000
• Volume: 0,20 - 3,00 l
• More details: 10 cavities, max 14000 bottles/hr, preform silo, Preform ascending conveyor, - infeed system, fitted for PCO Ø 28 mm. Against surplus price: complete compressor system, mould chiller and moulds

	PET stretch blow moulder SIG CORPOPLAST Blowmax 16 - Ser. III

• Manufacturer: SIG-Corpoplast
• Type: Blowmax 16 - Ser. III
• Year of construction: 2002
• Volume: 0,20 - 3,00 l
• More details: 16 cavities, max. 22.500 bottles/hr., incl. mould cooling unit, preform bunker, preform conveyor and infeed system, equipped for Ø 28mm PCO

	PET stretch blow moulder SIDEL SBO 16 ser. 2

• Manufacturer: Sidel
• Type: SBO 6 series 2
• Year of construction: 2000
• Volume: 0,25 - 3,00 l
• More details: PET Stretch blow moulder, up to 8400 bottles/hr., preform feeder, for Ø 28mm neck. Moulds, chiller and compressor against surplus price available

	PET stretch blow moulder SIDEL SBO 16 ser. 2+

• Manufacturer: Sidel
• Type: SBO 16 Ser. 2+
• Year of construction: 2004
• More details: 16 stations, linear oven, 16 heating modules, PLC control, incl. preform feeder, chiller. Compressor and mould sets against surplus price.

	Krones Contiform C24 Reheat Stretch Blow Moulding machine

• Year of Manufacture: 2000
• Output Capacity: 28,000 bph
• Preform Hopper/Elevator
• Infeed Rail
• High SPeed Palletising line
• Speed: Up to 24,000 bph – Depending on bottle sizes
• Neck type finish: 28 PCO
• Machine has recently been dismantled and put into storage. In very good condition.

	Blow-moulding used machine SIDEL SBO10

• Produce capacity - 12 000 bottles / Hrs
• feeder and orientator of preforms
• Year 1995
• good condition

	Complete producton Line to produce PET bottlers 1,5l Or 0,5l Blow machine KRONES CONTIFORM with compressor FRANCOIS ATTELIEURS

1. Blow machine KRONES

• Year of manufacture 2002;
• Produce capacity 11 000 pcs. bottles 1, 5 l / h (or 0,5L) ;
• Power supply 180 kW;
• System of preforms feeding;
• Tipper of pallets;
• Preform Fedder with basket;
• Unscramble of preform;
• Chiller of blow machine;
• Control cabinet.

2. Compressor, oil free high pressure - 40 bar

• type/model : FRANCOIS ATTELIEURS;
• year of manufacture : 2002;
• produce capacity : 1320 Nm /h;
• Power supply 250 kW;
• Chiller for compressor;
• dryer;
• control cabinet.

3. Complet of moulds for 1,5L and 0,5L (per 8 pieces in complet )

• Machines are In very good condition;
• Working hours approx. 12 000h;
• System Quick Change of moulds (2 hours for work);
• The possibility of the actuation at the customer.

	Automatic blowing machine of PET bottles SIPA SF4000

Characteristics

• production real 3.750 bph (nominal output 4.000);
• year 1999;
• only 10.000 working hour, used very low time;
• For transport overseas a container 40ft OT is sufficient;
• very good conditions.

Include

• blow mould included for 1,5 liter neck 28mm PCO/BPF;
• blow mould 2 liter.

Not include

• water chiller for mould & oven cooling because used centralized plant;
• air blowing compressor.

	Automatic blowing machine of PET bottles SMIFORM - SR 6

Characteristics

• year of output - 2005;
• production capacity up to 9 000 BPH;
• working hours - 9 100;
• condition - excellent.

Consisted of

• automatic blower SMIFORM - SR 6;
• preform feeder;
• outlet on pneumoconveyor;
• forms 1.5L and 2.0L;
• form cooling system;
• compressor equipment Bellis & Morcom VH 15 H3N;
  - year of output - 2005;
  - pressure - 4,55 MPa.
• cooler of a closed cycle ASKI 48 2 PET M, Italy:
  - year of output - 2005.

	Price for set

For more detailed information contact us by phone/fax in our head office in Minsk (+375-17) 334-36-63, 334-56-70, 293-12-17, 237-88-86, 237-88-87 e-mail: info@icimpex.com The contact number for our Russian regional offices is (+7-499) 921-02-83 The contact number for our Georgia regional offices is (+995-599) 902-206